Add support for ESP32-S3 variant #244

New issue

Open

opened 2025-02-28 16:15:41 +00:00 by dreed47 · 2 comments

dreed47 commented

2025-02-28 16:15:41 +00:00

(Migrated from github.com)

This will allow people to use the S3 chip without having to start from scratch. We should at the very least provide a compile option for the S3 in the platformio file.

example:

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1

This will allow people to use the S3 chip without having to start from scratch. We should at the very least provide a compile option for the S3 in the platformio file. example: [env:esp32-s3-devkitc-1] platform = espressif32 board = esp32-s3-devkitc-1

nconner-06 commented

2025-03-02 23:15:09 +00:00

(Migrated from github.com)

I think we need this in the BUILD_FLAGs section:

-DARDUINO_USB_CDC_ON_BOOT=1

in the platformio.ini file for the serial monitor to work on esp32-s3s

I think we need this in the BUILD_FLAGs section: -DARDUINO_USB_CDC_ON_BOOT=1 in the platformio.ini file for the serial monitor to work on esp32-s3s

nconner-06 commented

2025-03-03 07:40:48 +00:00

(Migrated from github.com)

Also, on most ESP32-s3 boards the on-board LED is a WS2812 multi-colour led (so we might need another library to drive it) and not attached to pin 2, thus the line "#define BUSY_PIN 2" in config.h will need to be updated